These round plastic end caps fit inside open tube ends to give furniture, metal frames and tubular assemblies a neat finish. Made from low-density polyethylene (LDPE), the inserts have a ribbed stem that grips inside the tube while the head covers the end. They are also known as round tube bungs, round tube inserts or plastic tube end plugs.
Choose your tube size, compatible wall thickness and colour using the product options above, then enter the quantity you need. Black, grey and white options vary by size and variant. There is no minimum order: buy one replacement or quantities for your project. Check your selected variant for its price, availability and applicable quantity discounts.
Use these ribbed inserts as round tube blanking plugs to finish suitable chair and table legs, bench frames, workshop furniture and other fabricated tube structures. They close exposed tube openings and cover the cut tube end, making them useful for both new assemblies and replacement parts.
The range includes inserts labelled for Nominal Bore (NB) pipe sizes from ½” NB to 3″ NB. Examples in the table include ½” NB / 21.3 mm, ¾” NB / 26.9 mm, 1″ NB / 33.7 mm, 1¼” NB / 42.4 mm, 1½” NB / 48.3 mm and 2″ NB / 60.3 mm.
NB is a nominal pipe size designation, not its measured outside diameter. Use the dimensions and wall thickness range for the exact insert. Some diameters have more than one variant: the two 48.3 mm options below, for example, have different wall thickness requirements and fitting dimensions.
Measure the outside diameter of the tube and its wall thickness, then match both to the same row in the table. The listed tube size refers to the outside of the tube, not the diameter of its internal opening.

Measure straight across the centre of the tube. If you start at the 10 cm mark, subtract 10 cm from the final reading: a reading from 10 cm to 12.5 cm gives 25 mm. Use callipers for wall thickness measurements that are too small to read accurately on a tape.

For more detail, see our guide to measuring for plastic end caps.
All dimensions below are in millimetres unless an NB designation is shown. W is the tube wall thickness; D, H, C, A and B refer to the drawing. The table includes reference dimensions for larger sizes; check the product options above for sizes currently available to order.
Use the colour buttons to select the matching tube size, wall thickness and colour. Check the selected variant before adding it to your basket. Sizes without colour buttons are available to order. Contact TREBORK to confirm the required size, colour, quantity, price and lead time.

| Type | Tube outside diameter / NB designation | Choose colour | Wall thickness W (mm) | D (mm) | H (mm) | C (mm) | A (mm) | B (mm) |
|---|---|---|---|---|---|---|---|---|
| Round End Cap | 10mm | Black Grey White | 0.8 – 1.5 | 10 | 3.6 | 10.5 | 5.1 | 8.6 |
| Round End Cap | 12mm | Black Grey White | 0.5 – 1.5 | 12 | 2.7 | 11.5 | 7.2 | 11.5 |
| Round End Cap | 13mm | Black Grey White | 1.0 – 1.5 | 13 | 3.5 | 9.8 | 7.9 | 9.7 |
| Round End Cap | 14mm | Black Grey White | 1.0 – 1.5 | 14 | 3.0 | 9.6 | 9.1 | 12.6 |
| Round End Cap | 15mm | Black Grey White | 1.0 – 2.5 | 15 | 3.0 | 9.7 | 9.0 | 13.7 |
| Round End Cap | 16mm | Black Grey White | 1.0 – 1.5 | 16 | 4.3 | 12.5 | 10.0 | 14.6 |
| Round End Cap | 18mm | Black Grey White | 1.0 – 1.5 | 18 | 4.0 | 12.7 | 12.2 | 16.5 |
| Round End Cap | 19mm | Black Grey White | 1.0 – 1.5 | 19 | 3.6 | 11.0 | 11.8 | 17.3 |
| Round End Cap | 20mm | Black Grey White | 1.0 – 1.5 | 20 | 4.1 | 12.7 | 12.8 | 18.3 |
| Round End Cap | 21mm | Black | 0.8 – 2.5 | 21 | 4.5 | 11.4 | 12.6 | 19.7 |
| Round End Cap | 21.3mm (½” NB) | Black Grey | 2.5 – 3.5 | 21.3 | 4.4 | 14.0 | 12.0 | 16.6 |
| Round End Cap | 22mm | Black Grey White | 1.0 – 2.0 | 22 | 3.9 | 12.6 | 12.8 | 18.2 |
| Round End Cap | 23mm | Black | 0.8 – 2.5 | 23 | 4.5 | 11.3 | 14.1 | 21.7 |
| Round End Cap | 24mm | Black | 0.8 – 2.5 | 24 | 4.5 | 11.5 | 15.5 | 22.5 |
| Round End Cap | 25mm | Black Grey White | 1.0 – 2.0 | 25 | 3.9 | 12.6 | 17.2 | 23.2 |
| Round End Cap | 26mm | Black | 0.8 – 3.0 | 26 | 4.6 | 11.6 | 17.4 | 24.4 |
| Round End Cap | 26.9mm (¾” NB) | Black Grey White | 2.0 – 3.2 | 26.9 | 4.5 | 14.5 | 19.7 | 23.6 |
| Round End Cap | 27mm | Black Grey White | 1.0 – 2.0 | 27 | 4.6 | 15.0 | 19.5 | 25.5 |
| Round End Cap | 28mm | Black Grey White | 1.0 – 2.0 | 28 | 4.5 | 14.7 | 19.4 | 27.0 |
| Round End Cap | 30mm | Black Grey White | 1.0 – 2.0 | 30 | 4.5 | 14.5 | 24.7 | 28.6 |
| Round End Cap | 32mm | Black Grey White | 1.0 – 2.0 | 32 | 4.2 | 14.2 | 24.8 | 30.5 |
| Round End Cap | 33.7mm (1″ NB) | Black Grey White | 2.5 – 3.2 | 33.7 | 4.7 | 14.9 | 24.9 | 28.7 |
| Round End Cap | 34mm | Black | 1.0 – 3.0 | 34 | 4.5 | 11.4 | 26.2 | 32.7 |
| Round End Cap | 35mm | Black Grey White | 1.0 – 2.0 | 35 | 4.6 | 14.7 | 25.8 | 32.9 |
| Round End Cap | 36mm | Black | 1.5 – 3.0 | 36 | 4.5 | 14.5 | 25.9 | 34.4 |
| Round End Cap | 38mm | Black Grey White | 1.5 – 2.5 | 38 | 4.4 | 17.5 | 28.4 | 36.0 |
| Round End Cap | 40mm | Black Grey | 1.5 – 2.5 | 40 | 4.3 | 17.5 | 30.5 | 38.0 |
| Round End Cap | 42.4mm (1¼” NB) | Black Grey White | 1.5 – 3.6 | 42.4 | 4.5 | 14.5 | 33.3 | 40.6 |
| Round End Cap | 45mm | Black Grey | 1.0 – 2.5 | 45 | 4.7 | 14.5 | 34.6 | 43.0 |
| Round End Cap | 48.3mm (1½” NB) | Black Grey White | 2.0 – 3.6 | 48.3 | 4.5 | 20.5 | 38.0 | 45.7 |
| Round End Cap | 48.3mm (1½” NB) | Black | 4.0 | 48.3 | 4.5 | 22.8 | 37.2 | 41.6 |
| Round End Cap | 50mm | Black Grey | 1.2 – 2.5 | 50 | 4.3 | 17.6 | 40.5 | 48.2 |
| Round End Cap | 55mm | Black Grey | 1.0 – 2.5 | 55 | 4.5 | 18.4 | 46.6 | 53.7 |
| Round End Cap | 60mm | Black Grey | 1.5 – 3.0 | 60 | 4.8 | 19.6 | 50.7 | 58.4 |
| Round End Cap | 60.3mm (2″ NB) | Black Grey White | 2.0 – 3.6 | 60.3 | 4.7 | 19.6 | 49.7 | 56.6 |
| Round End Cap | 65mm | Black | 2.5 – 4.0 | 65 | 4.6 | 20.9 | 51.4 | 62.5 |
| Round End Cap | 70mm | Black | 1.5 – 4.0 | 70 | 5.6 | 22.3 | 58.5 | 67.1 |
| Round End Cap | 76mm | Black | 1.5 – 2.5 | 76 | 4.8 | 22.4 | 63.7 | 73.6 |
| Round End Cap | 76mm (2½” NB) | Black | 3.0 – 4.0 | 76 | 4.7 | 22.1 | 63.5 | 71.3 |
| Round End Cap | 80mm | Black | 1.0 – 4.0 | 80 | 4.9 | 21.8 | 67.2 | 78.5 |
| Round End Cap | 90mm | Black | 1.0 – 2.5 | 90 | 4.7 | 21.4 | 78.6 | 89.6 |
| Round End Cap | 90mm (3″ NB) | Black | 3.0 – 5.0 | 90 | 4.8 | 21.7 | 76.8 | 86.4 |
| Round End Cap | 102mm | Available to order | 1.0 – 5.0 | 102 | 5.0 | 21.6 | 88.9 | 101.0 |
| Round End Cap | 108mm | Available to order | 3.0 – 5.0 | 108 | 6.0 | 29.0 | 92.4 | 103.5 |
| Round End Cap | 114mm | Available to order | 3.0 – 5.0 | 114 | 6.0 | 32.5 | 98.5 | 108.8 |
| Round End Cap | 120mm | Available to order | 2.0 – 4.0 | 120 | 6.2 | 28.0 | 106.5 | 116.5 |
| Round End Cap | 130mm | Available to order | 2.0 – 5.0 | 130 | 5.0 | 31.5 | 113.0 | 127.2 |
| Round End Cap | 140mm | Available to order | 2.0 – 6.5 | 140 | 6.0 | 33.5 | 124.0 | 136.3 |
| Round End Cap | 150mm | Available to order | 2.0 – 7.0 | 150.7 | 6.0 | 33.5 | 134.0 | 149.8 |
| Round End Cap | 160mm | Available to order | 2.5 – 7.5 | 160 | 6.0 | 34.0 | 142.0 | 153.0 |
These round tube inserts must not be used as hole plugs in thin sheet metal or panels. Their ribs are designed to grip along the inside wall of a tube. A hole in thin sheet metal does not provide enough depth for the ribs to engage properly, so an insert may push into the hole yet remain loose.
Hole plugs have a different retaining design and are used to close holes in thin sheet metal, furniture, panels and other components, depending on the plug type. See our round plastic hole plugs and check the plug’s suitability for both the hole diameter and the panel thickness before ordering.
The internal-diameter calculator below is intended to help select inserts for tube openings with sufficient insertion depth. It does not make a tube insert suitable for a hole in thin sheet metal.
The usual way to select a round tube insert is by the tube’s outside diameter and wall thickness. However, the outside may be inaccessible or obscured by a weld. This can happen when choosing blanking plugs for open tube ends in motorcycle frames.
If you can measure the internal opening, use our round end cap size calculator for internal tube measurements to help compare possible inserts. This is also useful for tubes with unusually thick walls, where the insert normally listed for that outside diameter may not fit.
A smaller nominal-size insert may be a candidate, but check its fitting dimensions and head diameter before ordering. The head must cover the opening, and the insert needs sufficient clear depth inside the tube. Welds, an uneven opening or internal obstructions can affect the fit, so treat calculator results as a starting point rather than a guarantee.
For help choosing a blanking insert for a motorcycle frame or another welded tube, contact TREBORK with the internal opening measurement, the available insertion depth and a clear photograph. Include the outside diameter and wall thickness if you can measure them.
For an existing insert that is too tight or too loose, see our guide to end cap fitting problems.
Looking for a different finish? Browse our round end caps range for domed, half-domed, chrome-plated and external options.

Jamie –
Item as described, it arrived on time and packaged well. I would buy from this seller again. Thank you!