These round plastic end caps fit inside open tube ends to give furniture, metal frames and tubular assemblies a neat finish. Made from low-density polyethylene (LDPE), the inserts have a ribbed stem that grips inside the tube while the head covers the end. They are also commonly called round tube bungs or plastic tube plugs.
Choose your tube size, compatible wall thickness and colour using the product options above, then enter the quantity you need. Black, grey and white options vary by size and variant. There is no minimum order: buy one replacement or quantities for your project. Check your selected variant for its price, availability and applicable quantity discounts.
Use these inserts to finish suitable round chair and table legs, bench frames, workshop furniture and other fabricated tube structures. They close exposed tube openings and cover the cut tube end, making them useful for both new assemblies and replacement parts.
The range includes inserts labelled for Nominal Bore (NB) pipe sizes from ½” NB to 3″ NB. Examples in the table include ½” NB / 21.3 mm, ¾” NB / 26.9 mm, 1″ NB / 33.7 mm, 1¼” NB / 42.4 mm, 1½” NB / 48.3 mm and 2″ NB / 60.3 mm.
NB is a nominal pipe size designation, not its measured outside diameter. Use the dimensions and wall thickness range for the exact insert. Some diameters have more than one variant: the two 48.3 mm options below, for example, have different wall thickness requirements and fitting dimensions.
Measure the outside diameter of the tube and its wall thickness, then match both to the same row in the table. The listed tube size refers to the outside of the tube, not the diameter of its internal opening.

Measure straight across the centre of the tube. If you start at the 10 cm mark, subtract 10 cm from the final reading: a reading from 10 cm to 12.5 cm gives 25 mm. Use callipers for wall thickness measurements that are too small to read accurately on a tape.

For more detail, see our guide to measuring for plastic end caps.
All dimensions below are in millimetres unless an NB designation is shown. W is the tube wall thickness; D, H, C, A and B refer to the drawing. The table includes reference dimensions for larger sizes; check the product options above for sizes currently available to order.
Linked sizes include a black colour selection. Check all product options before adding to your basket. For unlinked sizes, use the selectors above or contact TREBORK.

| Type | Tube outside diameter / NB designation | Wall thickness W (mm) | D (mm) | H (mm) | C (mm) | A (mm) | B (mm) |
|---|---|---|---|---|---|---|---|
| Round End Cap | 10mm | 0.8 – 1.5 | 10 | 3.6 | 10.5 | 5.1 | 8.6 |
| Round End Cap | 12mm | 0.5 – 1.5 | 12 | 2.7 | 11.5 | 7.2 | 11.5 |
| Round End Cap | 13mm | 1.0 – 1.5 | 13 | 3.5 | 9.8 | 7.9 | 9.7 |
| Round End Cap | 14mm | 1.0 – 1.5 | 14 | 3.0 | 9.6 | 9.1 | 12.6 |
| Round End Cap | 15mm | 1.0 – 2.5 | 15 | 3.0 | 9.7 | 9.0 | 13.7 |
| Round End Cap | 16mm | 1.0 – 1.5 | 16 | 4.3 | 12.5 | 10.0 | 14.6 |
| Round End Cap | 18mm | 1.0 – 1.5 | 18 | 4.0 | 12.7 | 12.2 | 16.5 |
| Round End Cap | 19mm | 1.0 – 1.5 | 19 | 3.6 | 11.0 | 11.8 | 17.3 |
| Round End Cap | 20mm | 1.0 – 1.5 | 20 | 4.1 | 12.7 | 12.8 | 18.3 |
| Round End Cap | 21mm | 0.8 – 2.5 | 21 | 4.5 | 11.4 | 12.6 | 19.7 |
| Round End Cap | 21.3mm (½” NB) | 2.5 – 3.5 | 21.3 | 4.4 | 14.0 | 12.0 | 16.6 |
| Round End Cap | 22mm | 1.0 – 2.0 | 22 | 3.9 | 12.6 | 12.8 | 18.2 |
| Round End Cap | 23mm | 0.8 – 2.5 | 23 | 4.5 | 11.3 | 14.1 | 21.7 |
| Round End Cap | 24mm | 0.8 – 2.5 | 24 | 4.5 | 11.5 | 15.5 | 22.5 |
| Round End Cap | 25mm | 1.0 – 2.0 | 25 | 3.9 | 12.6 | 17.2 | 23.2 |
| Round End Cap | 26mm | 0.8 – 3.0 | 26 | 4.6 | 11.6 | 17.4 | 24.4 |
| Round End Cap | 26.9mm (¾” NB) | 2.0 – 3.2 | 26.9 | 4.5 | 14.5 | 19.7 | 23.6 |
| Round End Cap | 27mm | 1.0 – 2.0 | 27 | 4.6 | 15.0 | 19.5 | 25.5 |
| Round End Cap | 28mm | 1.0 – 2.0 | 28 | 4.5 | 14.7 | 19.4 | 27.0 |
| Round End Cap | 30mm | 1.0 – 2.0 | 30 | 4.5 | 14.5 | 24.7 | 28.6 |
| Round End Cap | 32mm | 1.0 – 2.0 | 32 | 4.2 | 14.2 | 24.8 | 30.5 |
| Round End Cap | 33.7mm (1″ NB) | 2.5 – 3.2 | 33.7 | 4.7 | 14.9 | 24.9 | 28.7 |
| Round End Cap | 34mm | 1.0 – 3.0 | 34 | 4.5 | 11.4 | 26.2 | 32.7 |
| Round End Cap | 35mm | 1.0 – 2.0 | 35 | 4.6 | 14.7 | 25.8 | 32.9 |
| Round End Cap | 36mm | 1.5 – 3.0 | 36 | 4.5 | 14.5 | 25.9 | 34.4 |
| Round End Cap | 38mm | 1.5 – 2.5 | 38 | 4.4 | 17.5 | 28.4 | 36.0 |
| Round End Cap | 40mm | 1.5 – 2.5 | 40 | 4.3 | 17.5 | 30.5 | 38.0 |
| Round End Cap | 42.4mm (1¼” NB) | 1.5 – 3.6 | 42.4 | 4.5 | 14.5 | 33.3 | 40.6 |
| Round End Cap | 45mm | 1.0 – 2.5 | 45 | 4.7 | 14.5 | 34.6 | 43.0 |
| Round End Cap | 48.3mm (1½” NB) | 2.0 – 3.6 | 48.3 | 4.5 | 20.5 | 38.0 | 45.7 |
| Round End Cap | 48.3mm (1½” NB) | 4.0 | 48.3 | 4.5 | 22.8 | 37.2 | 41.6 |
| Round End Cap | 50mm | 1.2 – 2.5 | 50 | 4.3 | 17.6 | 40.5 | 48.2 |
| Round End Cap | 55mm | 1.0 – 2.5 | 55 | 4.5 | 18.4 | 46.6 | 53.7 |
| Round End Cap | 60mm | 1.5 – 3.0 | 60 | 4.8 | 19.6 | 50.7 | 58.4 |
| Round End Cap | 60.3mm (2″ NB) | 2.0 – 3.6 | 60.3 | 4.7 | 19.6 | 49.7 | 56.6 |
| Round End Cap | 65mm | 2.5 – 4.0 | 65 | 4.6 | 20.9 | 51.4 | 62.5 |
| Round End Cap | 70mm | 1.5 – 4.0 | 70 | 5.6 | 22.3 | 58.5 | 67.1 |
| Round End Cap | 76mm | 1.5 – 2.5 | 76 | 4.8 | 22.4 | 63.7 | 73.6 |
| Round End Cap | 76mm (2½” NB) | 3.0 – 4.0 | 76 | 4.7 | 22.1 | 63.5 | 71.3 |
| Round End Cap | 80mm | 1.0 – 4.0 | 80 | 4.9 | 21.8 | 67.2 | 78.5 |
| Round End Cap | 90mm | 1.0 – 2.5 | 90 | 4.7 | 21.4 | 78.6 | 89.6 |
| Round End Cap | 90mm (3″ NB) | 3.0 – 5.0 | 90 | 4.8 | 21.7 | 76.8 | 86.4 |
| Round End Cap | 102mm | 1.0 – 5.0 | 102 | 5.0 | 21.6 | 88.9 | 101.0 |
| Round End Cap | 108mm | 3.0 – 5.0 | 108 | 6.0 | 29.0 | 92.4 | 103.5 |
| Round End Cap | 114mm | 3.0 – 5.0 | 114 | 6.0 | 32.5 | 98.5 | 108.8 |
| Round End Cap | 120mm | 2.0 – 4.0 | 120 | 6.2 | 28.0 | 106.5 | 116.5 |
| Round End Cap | 130mm | 2.0 – 5.0 | 130 | 5.0 | 31.5 | 113.0 | 127.2 |
| Round End Cap | 140mm | 2.0 – 6.5 | 140 | 6.0 | 33.5 | 124.0 | 136.3 |
| Round End Cap | 150mm | 2.0 – 7.0 | 150.7 | 6.0 | 33.5 | 134.0 | 149.8 |
| Round End Cap | 160mm | 2.5 – 7.5 | 160 | 6.0 | 34.0 | 142.0 | 153.0 |
If your tube falls outside the listed ranges, our round end cap size calculator can help compare options using the internal opening. Check the candidate insert’s head size and fitting dimensions as well before ordering.
If you need help, contact TREBORK with the outside diameter, wall thickness and a clear photo of the tube opening. For an existing insert that is too tight or too loose, see our guide to end cap fitting problems.
Looking for a different finish? Browse our round end caps range for domed, half-domed, chrome-plated and external options.

Jamie –
Item as described, it arrived on time and packaged well. I would buy from this seller again. Thank you!